Please note: when the battery is put into the card slot, please remove the insulating sheet at the place where the battery is placed. The video door intercom bell is support two way audio, When somebody push the doorbell or PIR detected alarm, your mobile app will receive an alarm video call directly, you can just answer the alarm call to see the video call directly from you mobile app and talk in real time. It is HD Resolution with 720p adopted cmos chipset. You may enjoy the excellent image full hd video and picture from this door bell for home surveillance security. Wireless doorphone doorbell camera is for apartment or back yard.
It is not only a wireless intercoms doorbell for you, and it is also a security ip camera for your home. Multi functions that includes wireless, two way audio, motion sensor support both andriod and ios system of mobile. With rainproof design, the doorbell can be installed outdoors, and you are no need to worry about it is drenched by rain.
Support APP Function, it can be applied for Android, iphone, ipad APP Software. Support night vision and built-in IR-CUT technology, available day and night. Field of Angle View: 140°. Wi-Fi: IEEE 802 11 b/g/n. Audio: Two-way Talk With Noise Cancellation.
Recording: Device SD Card Recording(20 Seconds). Package Included: Only Doorbell (no batteries) Or 1xDoorbell+3xBatteries+1xDingdong According to your choice. Power Source: 3 x 18650 Specification Batteries. Monitoring: Device Button, Motion Detection, Remote Live View. Notification Function: Push Notifications within 2 second.Device Wakeup: Within 600 ms. Power Consumption: Power Consumption Standby 200µA, Working 170mA. Before You Start (Please fully charge before using the doorbell). Download and install Aiwit App. Scan the QR code or search for Aiwit on the Apple App Store or Google Play. Download and install the app. Set up your device in the Aiwit app.
To pair your device, follow the steps below and in-app instructions. Open Aiwit App and log in to your account. To add your camera, select the + icon. Press and hold the Doorbell Button until the red light is flflashing, tap Next, then tap Yes.
Enter your 2.4GHz Wi-Fi network and the Wi-Fi password, then tap Next (5GHz is not supported). Use your device camera to scan the QR Code shown on the app, then select Confirm once the Wi-Fi setup has finished. If your device is capturing an excessive number of events every day, you might need to recharge your battery sooner.Plus, the battery is also drained each time you use the Live View to look or speak through your doorbell. To prevent excessive events, you can adjust your motion settings to a lower sensitivity.
There is a leak-proof gasket at the bottom of the battery, please remove it before use. If you have any questions about the installation, you can refer to the installation video. Thanks for your understanding and support in advance! 30 days return is acceptable but package is must unopened, undamaged by receiver.This item is in the category "Consumer Electronics\Surveillance & Smart Home Electronics\Home Surveillance\Security Cameras". The seller is "7-magic" and is located in this country: US.
This item can be shipped to United States.